Home / Forum / Teknisk / Clutch safety switch klr 650

Clutch safety switch klr 650

You need to be a registered OTC member to get access to the forums. You can register here

Author Message

Ola Grøtta
57
Isfjorden

Tuesday July 23 2013 02:36:20 pm

Har nok en gang trøblet med å få start p.g.a safety switch. (Heldigvis hjemme)
Er det noen med el-erfaring som kan hjelpe meg og koble vekk bryteren, en kveld på bukkerittet?

Sverre Aandahl
492
Hunndalen
Østlandet

Wednesday July 24 2013 01:58:22 am

Hør muligens med Vlado på hytte nr 22.
(få med deg Oddbjørn og DR650 nå da)

Ola Grøtta
57
Isfjorden

Thursday July 25 2013 12:14:51 pm

Hør muligens med Vlado på hytte nr 22.
(få med deg Oddbjørn og DR650 nå da)


Skal prøve hvis han er hjemme. happy

Edited: Thursday July 25 2013 12:15:10 pm

Sverre Aandahl
492
Hunndalen
Østlandet

Thursday July 25 2013 06:33:13 pm

Og pass deg for glass og trapp også blunk

Ola Grøtta
57
Isfjorden

Thursday July 25 2013 11:03:16 pm

Og pass deg for glass og trapp også blunk


blunk Går i papp og alt på et plan her nå. confused

Geir Juklestad
153
Oslo
Østlandet

Friday July 26 2013 10:54:55 am

Fra KLR 650 forum etter Google søk "bypassing clutch safety switch Kawasaki":

http://www.klr650.net/forums/showthread.php?t=20752




1. Remove the smaller "starter circuit relay" from up behind the petcock.
It is kept within a small rubber holder that hangs on a little metal tab.
2. Make a 3 inch jumper using 14g wire and (2) 1/4 inch spade terminals.
3. Install the jumper into the relay connector.
Make sure the jumper is connecting the black wire to one of the Y/R wires.
Either one, both Y/R wires are connected back within the harness.
4. With bike in NUETRAL, test the jumper by hitting the starter button. Key
should be in the ON position, OFF/RUN switch in the RUN position.
5. If test is successfull, wrap jumper with several layers of black electrical
tape and tuck into the rubber holder from the relay. Re-install on metal tab

Keep old circuit relay in spares box. This relay is the same part no as fan relay.

Bike should now start, clutch-in or clutch-out, in nuetral or in gear.

Be warned, when you push the starter button the bike starts -period!


Lykke til med startingen

Geir